G Series PE Pipe Extrusion Line

Ningbo Fangli Technology Co., Ltd. is a mechanical equipment manufacturer with nearly 30 years’ experiences of plastic pipe extrusion equipment, new environmental protection and new materials equipment. Since its establishment Fangli has been developed based on user’s demands. Through continuous improvement, independent R&D on the core technology and digestion & absorption of advanced technology and other means, we have developed PVC pipe extrusion line, PP-R pipe extrusion line, PE water supply / gas pipe extrusion line, which was recommended by the Chinese Ministry of Construction to replace imported products. We have gained the title of “First-class Brand in Zhejiang Province”.

G series PE pipe extrusion line is suitable for producing PE, PP, etc. plastic pipe and other polyethylene material. It features high automation, stable and reliable performance, high efficiency, etc.

The process of PE pipe production line:

First, the PE plastic particle is loaded into the loading door of the single screw extruder.

Second, the material becomes the fusion conformation after going through the screw cylinder, being heated up, mixed round and plasticizing.

Third, the fusion material goes through the calibration sleeve, vacuum calibration tank and spray cooling tank, and then become the pipes products.

Fourth, the pipe is pulled by the haul off and sent into the cutter where the pipe is being cut according to the preset length, at the meantime, the cutting dust is removed by the dust-remover.

Fifth, the fixed-length pipe is being sent to the storage table, which has the auto-unloading function.

Ningbo Fangli Technology Co., Ltd. is a mechanical equipment manufacturer with nearly 30 years’ experiences of plastic pipe extrusion equipment, new environmental protection and new materials equipment. Here we’d like to introduce one of our most popular production G series PE 160 pipe extrusion Line to you for reference:

PE 160G Pipe Extrusion Line consists of the following single machines:

1. FLSJ-G series High-efficiency Single Screw Extruder: introduces most updated German technology. With new design of barrier screw, groove barrel and spiral feeding section (with temperature control system), ensures great adaptability to different materials and high-efficient & stable extrusion capacity.

2. Calibration Sleeve: we can provide suitable calibration sleeve for different plastic pipe.

3. Single Screw Co-extruder for Marking Strips: suitable fro the requirements of marking stripes on pipe from dia.16mm to 2200mm.

4. Spiral Extrusion Die: new generation light weight die head.

5. Vacuum Tank: using transparent stainless ball water level indicator to detect and control water level, water trap for sizing sleeve.

6. Spray Cooling Tank: fully-enclosed structure and tempered glass sliding window.

7. Meter-counting Printer: uses the hot press printing to print pigment held on a color ribbon onto plastic pipe materials, profile, or cable outer .Results are superior to those obtained using traditional ink printing methods. The metering counting is accurate, the print quality clear and sharp, performance reliable, and operation convenient. It is one of the most ideal pieces of metering printing equipment currently available.

8. Haul-off: caterpillar traction, independent frequency conversion drive motor, Japanese rotation encoder and MITSUBISHI speed regulator.

9. Cutting Machine: ring rotation of blade with chamfering function, which it has the advantages of low noise, no chip, energy saving and environmental protection.

10.  Single-station Coiler is mainly used to coil Aluminum-plastic composite pipes, cables, protective pipes, PE pipes and so on.

If you need more information, Ningbo Fangli Technology Co., Ltd. welcomes you to call for a detailed inquiry, we will provide you with professional technical guidance or equipment procurement suggestions.